View source

== Pinout ==

[[Image:dsub25m.png]]

25 PIN D-SUB MALE to the Amiga/Mac.

[[Image:dsubhi50m.png]]

50 PIN HI-DENSITY D-SUB MALE to the peripheral.

{| {{border}}
!                   !! DSub !! Hi DSub
|-
| Request           || 1    || 49
|-
| Message           || 2    || 46
|-
| Input/Output      || 3    || 50
|-
| Reset             || 4    || 45
|-
| Acknowledge       || 5    || 44
|-
| Busy              || 6    || 43
|-
| Data Bus 0        || 8    || 26
|-
| Data Bus 3        || 10   || 29
|-
| Data Bus 5        || 11   || 31
|-
| Data Bus 6        || 12   || 32
|-
| Data Bus 7        || 13   || 33
|-
| Control/Data      || 15   || 48
|-
| Attention         || 17   || 41
|-
| Select            || 19   || 47
|-
| Data Parity       || 20   || 34
|-
| Data Bus 1        || 21   || 27
|-
| Data Bus 2        || 22   || 28
|-
| Data Bus 4        || 23   || 30
|-
| Termination Power || 25   || 38
|}

''Note: All the other pins (7+9+14+16+18+24) at the DSub should be connected to pins 1-25 at the Hi-density D-Sub connector.''

== Contributions ==
* [[User:Joakim|Joakim Ögren]]

[[Category:Cable]]
[[Category:SCSI]]
[[Category:Obsolete]]