Apple Duo Dock Modem Adapter Card

From HwB

(Difference between revisions)
(Table look changed)
 
 
Line 37: Line 37:
  
 
== Contributions ==
 
== Contributions ==
 
 
* [[User:Joakim|Joakim Ögren]]
 
* [[User:Joakim|Joakim Ögren]]
  
 
== Sources ==
 
== Sources ==
 
 
* [http://til.info.apple.com/techinfo.nsf/artnum/n12929 Apple Tech Info Library 12929: Duo Dock/Duo Dock II, External Pinouts]
 
* [http://til.info.apple.com/techinfo.nsf/artnum/n12929 Apple Tech Info Library 12929: Duo Dock/Duo Dock II, External Pinouts]
  
 
[[Category:Connector]]
 
[[Category:Connector]]
 +
[[Category:Serial]]

Latest revision as of 12:49, 30 December 2006

Pinout

10 PIN UNKNOWN CONNECTOR

Pin Name Description
1 LINET/R Line/talk receive
2 DAA GND Modem DAA ground
3 DAA GND Modem DAA ground
4 DAA GND Modem DAA ground
5 /RA DVR Modem relay A driver
6 DAA ID IN ID input
7 /RING3 DET Ring detect signal
8 /RBDVR Modem relay B driver
9 DAA CNTL Modem DAA control
10 +5 V MODEM +5 V power

When the PowerBook Duo computer is housed in the Duo Dock, you cannot access the integral modem via the RJ-11 connector on the PowerBook Duo's rear panel. A modem adapter card provides the connection. It plugs into the side of the Duo Dock's main logic board, using a 10-pin header connector. The card supplies the RJ-11 hook up, which is accessed on the rear panel of the Duo Dock. The adapter card interfaces with the modem card in the PowerBook Duo computer via its 10-pin connector, printed circuit traces, and the 152-pin expansion connector.

Contributions

Sources