Centronics
From HwB
(Difference between revisions)
(Table look changed) |
|||
| Line 84: | Line 84: | ||
== Contributions == | == Contributions == | ||
| − | |||
* [[User:Joakim|Joakim Ögren]] | * [[User:Joakim|Joakim Ögren]] | ||
* [mailto:[email protected] Peter Korsgaard] | * [mailto:[email protected] Peter Korsgaard] | ||
| Line 90: | Line 89: | ||
[[Category:Connector]] | [[Category:Connector]] | ||
| + | [[Category:Parallel]] | ||
| + | [[Category:Obsolete]] | ||
Latest revision as of 14:38, 25 January 2007
Pinout
36 PIN CENTRONICS FEMALE at the Printer.
| Pin | Name | Dir | Description |
|---|---|---|---|
| 1 | /STROBE |  |
Strobe |
| 2 | D0 |  |
Data Bit 0 |
| 3 | D1 | |
Data Bit 1 |
| 4 | D2 | |
Data Bit 2 |
| 5 | D3 | |
Data Bit 3 |
| 6 | D4 | |
Data Bit 4 |
| 7 | D5 | |
Data Bit 5 |
| 8 | D6 | |
Data Bit 6 |
| 9 | D7 | |
Data Bit 7 |
| 10 | /ACK |  |
Acknowledge |
| 11 | BUSY | |
Busy |
| 12 | POUT | |
Paper Out |
| 13 | SEL | |
Select |
| 14 | /AUTOFEED | |
Autofeed |
| 15 | n/c | - | Not used |
| 16 | 0 V |  |
Logic Ground |
| 17 | CHASSIS GND | |
Shield Ground |
| 18 | +5 V PULLUP | |
+5 V DC (50 mA max) |
| 19 | GND | |
Signal Ground (Strobe Ground) |
| 20 | GND | |
Signal Ground (Data 0 Ground) |
| 21 | GND | |
Signal Ground (Data 1 Ground) |
| 22 | GND | |
Signal Ground (Data 2 Ground) |
| 23 | GND | |
Signal Ground (Data 3 Ground) |
| 24 | GND | |
Signal Ground (Data 4 Ground) |
| 25 | GND | |
Signal Ground (Data 5 Ground) |
| 26 | GND | |
Signal Ground (Data 6 Ground) |
| 27 | GND | |
Signal Ground (Data 7 Ground) |
| 28 | GND | |
Signal Ground (Acknowledge Ground) |
| 29 | GND | |
Signal Ground (Busy Ground) |
| 30 | /GNDRESET | |
Reset Ground |
| 31 | /RESET | |
Reset |
| 32 | /FAULT | |
Fault (Low when offline) |
| 33 | 0 V | |
Signal Ground |
| 34 | n/c | - | Not used |
| 35 | +5 V | |
+5 V DC |
| 36 | /SLCT IN | |
Select In (Taking low or high sets printer on line or off line respectively) |
Note: Direction is Printer relative Computer.