Apple IIc Joystick
From HwB
(Difference between revisions)
| Line 20: | Line 20: | ||
| 4 || n/a || Not used | | 4 || n/a || Not used | ||
|- | |- | ||
| − | | 5 || PDL0 || Paddle 0 hand controller input. Must be connected to a | + | | 5 || PDL0 || Paddle 0 hand controller input. Must be connected to a 150k Ω variable resistor connected to +5V. |
|- | |- | ||
| 6 || n/c || Not connected | | 6 || n/c || Not connected | ||
| Line 26: | Line 26: | ||
| 7 || GAMESW0 || Switch input 0 (sometimes called paddle button 0). | | 7 || GAMESW0 || Switch input 0 (sometimes called paddle button 0). | ||
|- | |- | ||
| − | | 8 || PDL1 || Paddle 1 hand controller input; must be connected to a | + | | 8 || PDL1 || Paddle 1 hand controller input; must be connected to a 150k Ω variable resistor connected to +5V. |
|- | |- | ||
| 9 || n/a || Not used | | 9 || n/a || Not used | ||
Latest revision as of 20:31, 26 January 2007
Pinout
9 PIN D-SUB FEMALE at the computer.
9 PIN D-SUB MALE at the joystick cable.
| Pin | Name | Description |
|---|---|---|
| 1 | GAMESW1 | Switch input 1 (sometimes called paddle button 1). |
| 2 | +5V | +5 VDC (max 100mA) |
| 3 | GND | System ground. |
| 4 | n/a | Not used |
| 5 | PDL0 | Paddle 0 hand controller input. Must be connected to a 150k Ω variable resistor connected to +5V. |
| 6 | n/c | Not connected |
| 7 | GAMESW0 | Switch input 0 (sometimes called paddle button 0). |
| 8 | PDL1 | Paddle 1 hand controller input; must be connected to a 150k Ω variable resistor connected to +5V. |
| 9 | n/a | Not used |