Wiimote Expansion Port
From HwB
(Difference between revisions)
(fixed SDA/SCL pins .. was reversed! changed to better hw refrence.) |
|||
| (One intermediate revision by one user not shown) | |||
| Line 19: | Line 19: | ||
| 1 || Red || 3.3V | | 1 || Red || 3.3V | ||
|- | |- | ||
| − | | 2 || | + | | 2 || Yellow || SCL. I²C Serial Clock. (400 kHz) |
|- | |- | ||
| 3 || Red || Connected to 3.3V inside attachment connector | | 3 || Red || Connected to 3.3V inside attachment connector | ||
| Line 25: | Line 25: | ||
| 4 || - || Not connected. | | 4 || - || Not connected. | ||
|- | |- | ||
| − | | 5 || | + | | 5 || Green || SDA. I²C Serial Data |
|- | |- | ||
| 6 || White || Ground | | 6 || White || Ground | ||
| Line 35: | Line 35: | ||
== Source == | == Source == | ||
| − | * [http:// | + | * [http://wiire.org/Wii/protocols/wiimote_bus Wii Reverse Engineered: wiire.org] |
[[Category:Connector]] | [[Category:Connector]] | ||
[[Category:Human Interface Device]] | [[Category:Human Interface Device]] | ||
Latest revision as of 15:54, 26 July 2009
Available at the Wiimote, remote control of Nintendo Wii.
For connection of Classic or Nunchuck controller to Wiimote.
Pinout
|~~_____~~| | | | 6 4 2 | | ----- | | 5 3 1 | \_________/
From the Wiimote side
| Pin | Cable color | Description |
|---|---|---|
| 1 | Red | 3.3V |
| 2 | Yellow | SCL. I²C Serial Clock. (400 kHz) |
| 3 | Red | Connected to 3.3V inside attachment connector |
| 4 | - | Not connected. |
| 5 | Green | SDA. I²C Serial Data |
| 6 | White | Ground |
Notes
- I²C slave address is 0x52.
- Gameboy Advance Link Cable connector is similar.