3.5" Power
From HwB
(Difference between revisions)
| Line 14: | Line 14: | ||
{| {{border}} | {| {{border}} | ||
| − | ! Pin !! Name | + | ! Pin !! Name || width="16" | !! Color !! Description |
|- | |- | ||
| 1 || +5V || width="16" bgcolor="ff0000" | || Red || +5 VDC | | 1 || +5V || width="16" bgcolor="ff0000" | || Red || +5 VDC | ||
| Line 25: | Line 25: | ||
|} | |} | ||
| − | Recommended wiresize according to the ATX standard: 20 [[AWG]]<br> | + | Recommended wiresize according to the ATX standard: 20 [[AWG]]<br/> |
At cables: AMP 171822-4 | At cables: AMP 171822-4 | ||
Revision as of 18:22, 31 March 2007
| Todo: This page needs some editing. |
Used for floppies.
Name according to the ATX standard: Floppy Drive Connector.
Pinout
UNKNOWN CONNECTOR at the powersupply cable.
UNKNOWN CONNECTOR at the peripheral.
| Pin | Name | Color | Description | |
|---|---|---|---|---|
| 1 | +5V | Red | +5 VDC | |
| 2 | GND | Black | +5 V Ground | |
| 3 | GND | Black | +12 V Ground (Same as +5 V Ground) | |
| 4 | +12V | Yellow | +12 VDC |
Recommended wiresize according to the ATX standard: 20 AWG
At cables: AMP 171822-4