Wii A/V
From HwB
(Difference between revisions)
| Line 38: | Line 38: | ||
| 12 || colspan="3" | GND | | 12 || colspan="3" | GND | ||
|- | |- | ||
| − | | 13 || colspan="3" | +12V | + | | 13 || colspan="3" | 16:9/4:3 || ~ +6V for 16:9<br/>+12V for 4:3 <sup>3)</sup> |
|- | |- | ||
| − | | 14 || colspan="3" | Data Line 1 || | + | | 14 || colspan="3" | Data Line 1 <sup>1)</sup> || |
* 0V = 525 lines (default) | * 0V = 525 lines (default) | ||
* 2.2V = 750 lines | * 2.2V = 750 lines | ||
* 5V = 1125 lines | * 5V = 1125 lines | ||
|- | |- | ||
| − | | 15 || colspan="3" | Data Line 2 || | + | | 15 || colspan="3" | Data Line 2 <sup>1)</sup> || |
* 0V = 59.94i / 60i | * 0V = 59.94i / 60i | ||
* 5V = 59.94p / 60p | * 5V = 59.94p / 60p | ||
|- | |- | ||
| − | | 16 || colspan="3" | Data Line 3 || | + | | 16 || colspan="3" | Data Line 3 <sup>1)</sup> <sup>2)</sup>|| |
* 0V = 4:3 | * 0V = 4:3 | ||
* 2.2V = 4:3 letterbox | * 2.2V = 4:3 letterbox | ||
| Line 55: | Line 55: | ||
|} | |} | ||
| − | + | ''Notes:'' | |
| + | * <sup>1)</sup> Used for the japanese [[D Tanshi]] connector (D-Terminal). | ||
| + | * <sup>2)</sup> Doesn't seem to work on PAL Wii | ||
| + | * <sup>3)</sup> Seems to give +12VDC always on NTSC Wii | ||
| + | |||
| + | {| {{border}} | ||
| + | ! rowspan="2" | Mode (Pin 8 & 10) !! Output PAL !! Output NTSC | ||
| + | |- | ||
| + | ! !! Pin 7/9/11 !! Pin 7/9/11 | ||
| + | |- | ||
| + | | Not shorted || RGB (15kHz) || S-Video | ||
| + | |- | ||
| + | | Shorted || colspan="2" | Component | ||
| + | |} | ||
| + | |||
| + | ''Notes:'' | ||
| + | * PAL Wii outputs RGB, which is 15kHz. Can be used with a scandoubler to connect to VGA-monitor. | ||
| + | |||
| + | == See also == | ||
| + | * [[Wii to SCART]] | ||
| + | * [[Wii to S-Video]] | ||
== Contributor == | == Contributor == | ||
Revision as of 19:12, 24 June 2007
Available at Nintendo Wii.
Contents |
Pinout
+--------------+ | 1 15 \| | ========== | | 2 16 /| +--------------+ (at Wii)
| Pin | Name | Notes | ||
|---|---|---|---|---|
| RGB | Component | S-Video | ||
| 1 | Audio Left | |||
| 2 | Audio Right | |||
| 3 | Composite Video/Sync | |||
| 4 | +5V | |||
| 5 | GND | |||
| 6 | GND | |||
| 7 | Red | Y | Y | |
| 8 | Mode | |||
| 9 | Green | Pb | C | |
| 10 | Mode | |||
| 11 | Blue | Pr | ||
| 12 | GND | |||
| 13 | 16:9/4:3 | ~ +6V for 16:9 +12V for 4:3 3) | ||
| 14 | Data Line 1 1) |
| ||
| 15 | Data Line 2 1) |
| ||
| 16 | Data Line 3 1) 2) |
| ||
Notes:
- 1) Used for the japanese D Tanshi connector (D-Terminal).
- 2) Doesn't seem to work on PAL Wii
- 3) Seems to give +12VDC always on NTSC Wii
| Mode (Pin 8 & 10) | Output PAL | Output NTSC |
|---|---|---|
| Pin 7/9/11 | Pin 7/9/11 | |
| Not shorted | RGB (15kHz) | S-Video |
| Shorted | Component | |
Notes:
- PAL Wii outputs RGB, which is 15kHz. Can be used with a scandoubler to connect to VGA-monitor.