PlayStation A/V
From HwB
(Difference between revisions)
| Line 1: | Line 1: | ||
| − | Available on the Sony PlayStation | + | Available on the Sony PlayStation [[PlayStation|1]], [[PlayStation 2|2]] & [[PlayStation 3|3]] console. |
== Pinout == | == Pinout == | ||
| Line 43: | Line 43: | ||
''Note: Add a 220uf capacitor for each RGB line (in series) for improved picture quality.'' | ''Note: Add a 220uf capacitor for each RGB line (in series) for improved picture quality.'' | ||
| + | |||
| + | ''Note: You will need to use an LM1881 or similar circuit to strip the sync from the video line.'' | ||
| + | |||
| + | ''The [[PlayStation 2]] can do VGA through this port, however it is software controlled, and since there aren’t enough pins for H+V Sync, it uses Sync-On-Green, which not all monitors support.'' | ||
== Contributions == | == Contributions == | ||
Latest revision as of 18:26, 13 June 2007
Available on the Sony PlayStation 1, 2 & 3 console.
Pinout
+--------------+ | oooooooooooo | +--------------+ 1 12
12 PIN ?? at the PlayStation.
| Pin | Name | Description |
|---|---|---|
| 1 | GND | Ground |
| 2 | RT | Right Audio |
| 3 | GND | Ground |
| 4 | LT | Left Audio |
| 5 | Y | S-Video Y |
| 6 | SYNC | Composite Sync |
| 7 | C | S-Video C |
| 8 | VGND | Video Ground |
| 9 | B | Blue |
| 10 | +5V | +5 VDC |
| 11 | R | Red |
| 12 | G | Green |
Note: Add a 220uf capacitor for each RGB line (in series) for improved picture quality.
Note: You will need to use an LM1881 or similar circuit to strip the sync from the video line.
The PlayStation 2 can do VGA through this port, however it is software controlled, and since there aren’t enough pins for H+V Sync, it uses Sync-On-Green, which not all monitors support.