3.5" Power
From HwB
(Difference between revisions)
| Line 17: | Line 17: | ||
| 1 || +5V || width="16" bgcolor="#ff0000" | || Red || +5 VDC | | 1 || +5V || width="16" bgcolor="#ff0000" | || Red || +5 VDC | ||
|- | |- | ||
| − | | 2 || GND || width="16" bgcolor="#000000" | || Black || | + | | 2 || GND || width="16" bgcolor="#000000" | || Black || Ground for pin 1 |
|- | |- | ||
| − | | 3 || GND || width="16" bgcolor="#000000" | || Black || | + | | 3 || GND || width="16" bgcolor="#000000" | || Black || Ground for pin 4 (same as pin 2) |
|- | |- | ||
| 4 || +12V || width="16" bgcolor="#ffff00" | || Yellow || +12 VDC | | 4 || +12V || width="16" bgcolor="#ffff00" | || Yellow || +12 VDC | ||
Latest revision as of 00:51, 26 September 2008
Used for floppydrives.
Name according to the ATX standard: Floppy Drive Connector.
Pinout
UNKNOWN CONNECTOR at the powersupply cable.
UNKNOWN CONNECTOR at the peripheral.
| Pin | Name | Color | Description | |
|---|---|---|---|---|
| 1 | +5V | Red | +5 VDC | |
| 2 | GND | Black | Ground for pin 1 | |
| 3 | GND | Black | Ground for pin 4 (same as pin 2) | |
| 4 | +12V | Yellow | +12 VDC |
Recommended wiresize according to the ATX standard: 20 AWG
At cables: AMP 171822-4