IPod Dock

From HwB

Revision as of 06:10, 29 December 2007 by Jpuchert (Talk | contribs)

Available at 3rd, 4th and 5th generation of Apple iPod. Also available at the Apple iPhone.

Contents

Pinout

Pin Description
1 Ground
2 Line Out - GND
3 Line Out - Right
4 Line Out - Left
5 Line In - Right
6 Line In - Left
7
8 Composite Video or Component Video Pb (use pin 1 as ground) *)
9 S-Video Chrominance or Component Video Y *)
10 S-Video Luminance or Component Video Pr *)
11 Serial GND (TTL)
12 Serial TxD (TTL)
13 Serial RxD (TTL)
14 *)
15 Ground
16 USB GND
17 *)
18 +3.3V Power
19 FireWire Power +12 VDC
20 FireWire Power +12 VDC
21 Accessory Indicator
22 FireWire Data TPA (-) *)
23 USB Power +5 VDC
24 FireWire Data TPA (+) *)
25 USB Data (-)
26 FireWire Data TPB (-) *)
27 USB Data (+)
28 FireWire Data TPB (+)
29 FireWire Ground
30 FireWire Ground

Note: *) Not connected at iPhone dock.

Audio Video Serial USB FireWire

Accessory Indicator

Connect pin 21 to ground via resistor.

Resistor Accessory
1.0k Ω iPod docking station, iPod beeps when connected
6.8k Ω Serial port mode. Pin 11-13 are TTL level. Requires MAX232 chip to convert to RS232 levels.
10k Ω Takes my iPod into photo import mode
500k Ω vava uses this for his serial-via-dock experiments (Used in Dension Ice Link Plus car interface)
1.0M Ω Belkin auto adaptor, iPod shuts down automatically when power disconnected

More information

  • JAE, manufacturer of connector

Contributor

Source