Xbox 360 A/V
From HwB
Revision as of 12:52, 25 January 2011 by CrazyIcecap (Talk | contribs)
Available in the Microsoft Xbox 360.
Contents |
Pinout
1 29 __________________________________ \ . . . . . . . . . . . . . . . / At the Xbox 360 \ . . . . . . . . . . . . . . . / -------------------------------- 2 30
| Pin | Description |
|---|---|
| 1 | Red Gnd |
| 2 | Green Ground |
| 3 | Red (Pr in component mode) |
| 4 | Green (Y in component mode) |
| 5 | Composite Gnd |
| 6 | Blue Ground |
| 7 | Composite (Sync in RGB mode) |
| 8 | Blue (Pb in component mode) |
| 9 | H-sync Gnd |
| 10 | V-sync Gnd |
| 11 | H-sync (VGA Mode) |
| 12 | V-sync (VGA Mode) |
| 13 | Audio-R Gnd |
| 14 | Audio-L Gnd |
| 15 | Audio-R |
| 16 | Audio-L |
| 17 | Switching voltage (for SCART pin-8) |
| 18 | CBL-ID1 |
| 19 | Blanking Signal (for SCART pin-16) |
| 20 | CBL-ID1.1 |
| 21 | Unknown |
| 22 | CBL-ID2 |
| 23 | Unknown |
| 24 | CBL-ID2.1 |
| 25 | Digital Audio (S/PDIF) |
| 26 | CBL-ID3 |
| 27 | Digital Audio Gnd (S/PDIF) |
| 28 | CBL-ID3.1 |
| 29 | Optical - +5V |
| 30 | See J2B1 or J8C1 |
Note: Pin 29 is used to power IC for converting electrical S/PDIF into optical.
Setting Cable ID
| Connection | Mode |
|---|---|
| ID1-ID1.1 | VGA mode enabled |
| ID2-ID2.1 & ID3-ID3.1 | RGB (SCART) mode enabled |
| ID3-ID3.1 | Component (Y/Pb/Pr) mode enabled |
| ID2-ID2.1 | Composite (TV) mode enabled |
| ID1-ID1.1 & ID2-ID2.1 | Optical/RCA Audio adapter mode enabled |
| ID1-ID1.1 & ID3-ID3.1 | S-Video mode enabled |